Who publishes this
Inch & Drawer is published by Danorie, a sole proprietorship registered in the Republic of Korea (business registration no. 586-04-03585), based in Anyang. It is a one-person operation that builds small web tools people use once and forget — a travel itinerary maker, a few calculators — and this is one of them. It is written for readers in the United States. No US office, professional qualification or product-testing team is claimed, here or anywhere else on this site.
Why this site exists
The numbers that decide a purchase — how much paint, whether a tray fits a drawer — are the ones product pages leave out or bury. This site is about one of them: the space inside a kitchen drawer or cabinet, and whether an organizer’s published dimensions clear it.
How a figure gets onto this site
Every dimension is quoted from the page that publishes it — the maker’s own page where there is one, otherwise a named seller’s listing — with the date it was checked, so you can go and read the same sentence yourself. Three measurements come first: inside width, usable depth and the clear height with the drawer closed. An organizer’s body dimensions are compared with those numbers after your allowance is subtracted once per axis. A stated minimum drawer height is compared with your raw measured height instead, with no allowance, and a violated requirement outranks a good body result. The result is one of four states — “Outside your numbers”, “Below the stated minimum”, “More to check” or “Within your numbers” — and never a score. Every record names the model, the page its dimensions came from and the date that page was checked. The full rules are on the methodology page; how drafts are produced and checked, including where AI is used, is on the editorial policy page.
What this site does not do
Nothing here has been tested by hand, so you will not find a ranking, a best pick, a price, a rating or a stock figure anywhere on it. Where a paid link appears it is labeled, and it never changes the comparison printed above it. Where published figures cannot answer a question, the page says so rather than guessing — more than one page ends by telling you that the only remaining source is your own tape measure. And where a published dimension could not be traced back to the page it was attributed to, the record was taken off the site rather than left up.
Contact
Email contact@danorie.com. A correction that changes a published result is recorded under the corrections policy rather than edited away quietly.